Sidebar
public:module:hyper-v:limitation
This is an old revision of the document!
Limitations
1. Backup of guest machines located on a SMB 3.0 shares is not supported.
2. Backup of virtual machine with pass through disk (directly attached physical disk) is not supported.
3. For backup of individual virtual disks, the restored virtual machine does not support the reversion of previous snapshots, if the snapshot contains disks which are not previously backed up by CloudBacko Pro.
4. A guest virtual machine can only be restored to the Hyper-V server with the same version, e.g. backup of a guest on Hyper-V 2012 R2 server cannot be restored to Hyper-V 2008 R2 Server or vice versa.
5. The guest virtual machine will not start up if the virtual disk containing the guest operating system is not restored.
6. Run Direct Restore of VM containing .VHDS shared virtual disk(s) is not supported.
7. Restore of individual virtual disks is only supported using the Restore raw file option for a virtual disk with no snapshots.
This will require modification of Hyper-V guest configuration files, and this only should be done if you have in-depth knowledge and understanding of Hyper-V, otherwise the guest virtual machine may not startup properly.
8. Replication must be disabled for the VM selected for backup, otherwise there may be following error occurring during backup job:
Failed to backup virtual machine "guest_guid"., Reason = "Failed to take VM snapshot. Error = [CreateVirtualSystemSnapshotV2] Error="The method call failed." (32775)".
public/module/hyper-v/limitation.1568022048.txt.gz · Last modified: 2019/09/09 17:40 by ronnie.chan
